Advertisement
Take care to avoid the hot surface of the appliance coming into direct contact with the skin, in particular the ears, eyes, face and neck.
Do not touch the hot plates when the appliance is switched on.
This appliance features delayed activation control. Immediately after turning the appliance on, you are able to adjust the temperature settings. After 5 seconds of the appliance being turned on or the LED becoming solid in colour, the temperature buttons will automatically lock. To adjust the heat settings, hold down the '+/-' button for 1-2 seconds, this will deactivate the lock mode and allow the settings to be changed. To turn off the appliance whilst in lock mode, hold down the button marked ''' until the unit switches off.
Please note: The blue LED light along the plate will illuminate to indicate the ionic feature is activated.
Please note: The appliance temperature settings will lock automatically after 5 seconds. (See Switch Activation Control).
Hot surfaces! During use, take care not to bring the appliance into contact with the scalp, face, ears or neck.
If you have delicate, fine or coloured hair, use the lower heat settings. For thicker hair, use the higher heat settings. It is suggested to always complete a test on initial use to ensure the correct temperature is used on the hair type. Start on the lowest setting and increase the temperature until desired result is achieved.
Below is a guide of the temperature settings:
Setting 1 = 150°C
Setting 2 = 170°C
Setting 3 = 190°C
Setting 4 = 210°C
Setting 5 = 235°C
The moisture balancing dual ionic system combines both positive and negative ions, that work together to hydrate the hair and to eliminate frizz as you straighten. Turning on the appliance will automatically activate the dual ionic system.
Please note: The blue LED light along the plate will illuminate to indicate the ionic feature is activated. The release of ions produces a buzzing noise and in high levels of humidity the occasional low voltage flash of light. This is completely normal.
This appliance has an automatic shut off feature for added safety. If the appliance is switched on for more than 60 minutes continuously, then it will automatically switch off. To continue using the appliance after this time, press and hold the '' button for 1-2 seconds to turn the power on.
The appliance comes with a heat wrap for use during and after styling. During use do not place the appliance on any heat sensitive surface, even when using the heat wrap provided. After use, switch off and unplug the appliance. Immediately wrap the appliance in the heat wrap provided and allow to fully cool down. Continue to keep it out of reach of children as it will remain hot for several minutes.
To help keep your appliance in the best possible condition follow the steps below:
BABYLISS SARL
ZI du Val de Calvigny 59141
Iwuy France
www.babyliss.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download BaByliss ST573E - Hydro Fusion Hair Straightener Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the ST573E that isn't answered in the manual? Leave your question here.