CabCAM CDW7M1C Operating Instructions Manual page 17

(8)
Press or
enter PAIRING.
Auto pairing:

①
Choose the channel that needs to be set up, the monitor will display the message "
PAIRING START 50" .
②
Within the countdown of 50 seconds, power on the camera.
③
The monitor and cameras will synchronize themselves with each other after the camera is
powered for 5s.
④
If auto pairing is completed, the video will be displayed. If it is failed, a message " No Signal
" will be displayed. Repeat the pairing procedure.
Manual pairing:

①
Choose the channel that needs to be set up, the monitor will display the message "
PAIRING START 50" .
②
Within the countdown of 50 seconds, power on the camera. Press the pairing button on the
camera.
③
The monitor and cameras will synchronize themselves with each other.
④
If pairing is completed, the video will be displayed. If it is failed, a message " No Signal" will
be displayed. Repeat the pairing procedure.
to select PAIRING, press OK to enter. Press OK for 3 seconds to
~ ~
15