Basic Operation - CabCAM CDW7M1C Operating Instructions Manual

7. Basic Operation

7.1 Installation of Center Mounting Bracket:
① Adjust monitor level by sliding the support
to the desired height.
② Adjust the angle of the monitor and
tighten the knob on the center mounting
bracket.
Support attaching piece
Knob
7.2 Installation of U-support Bracket
Camera
DC/ 12V
Battery
Video inputs
Angle adjustment
screws
Red wire to positive power supply
of DC/10-32V. Black wire to
Ground.
Brown wire to positive power wire of reversing light.
White wire to positive power wire of
left light . Blue wire to positive
power wire of right light . Green or
yellow wire to other positive power
wire.
Automobile
application
~ ~
8