Table of Contents
Advertisement
7.3 Reversing Display:
7.3.1
When the green wire is activated, the monitor
automatically switches to CAM1.
7.3.2
When the white wire is connected to the positive wire of the
left turn light , the monitor automatically switches to
CAM2(left side camera) when the left light is activated.
7.3.3
When the blue wire is connected to the positive wire of the
right turn light, the monitor automatically switches to CAM3
(right side camera) when the right light is activated.
7.3.4
When the brown wire is connected to the positive wire of
reversing light, the monitor automatically switches to CAM4(back-
up camera) when the reversing light is activated. The distance
label will be displayed.
7.3.5
When the yellow wire is connected to the positive wire, the
monitor automatically switches to quad or split display.
Connection may vary due to different applications.
7.4 Volume selection under quad view
7.4.1
Check the volume icon on the top right area under single channel mode. It stands for audio out
for the selected channel.
7.4.2
Press
or
CAM1
CAM3
to select the channel for audio out.
CAM2
CAM4
~
~
9
CAM1
CAM2
CAM3
CAM4
Advertisement
Table of Contents
