Voice recognition system
Voice command examples
To use the voice recognition function,
saying one command is sometimes
sufficient, but at other times it is neces-
sary to say two or more commands. As
examples, some additional basic opera-
tions by voice commands are described
here.
Example 1: Changing FM Radio &
Frequency
1. Press
on the steering wheel
remote control.
2. After the beep sounds, say "FM".
3. When the "FM" command rec-
ognized, the main screen will be
changed to the FM main screen.
4. Press
on the steering wheel
remote control.
5. After the beep sounds, say
"Frequency one-hundred two" or
"one-hundred two mega hertz".
6. When the spoken frequency is recog-
nized, the FM frequency is changed
to the 102 MHz.
Example 2: Changing playlist of
USB (CD)
1. Press
on the steering wheel
remote control.
2. After the beep sounds, say "List".
3. When the command is recognized,
the screen will be changed to USB
(CD) LIST screen.
62
4. Press
, after the beep sounds,
you can say one of the playlist, for
example "micky green oh".
5. When the song selected is recog-
nized, it is played directly.
6. Press
on the steering wheel
remote control.
7. After the beep sounds, say "Next
track" or "Previous track".
8. When the command is recognized,
the next or previous song is played.