Changing The Password; Disabling The Password Function - ViewSonic LS610WHE User Manual

Changing the Password

1. Press Menu to open the OSD Menu and go to:
Change Password.
2. Press Enter, the message, 'INPUT CURRENT PASSWORD' will appear.
3. Enter the old password.
ͫ If the password is correct, the message, 'INPUT NEW PASSWORD' will
appear.
ͫ If the password is incorrect, a password error message will appear for 5
seconds followed by the message, 'INPUT CURRENT PASSWORD'. You can
try again or press Exit to cancel.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.
6. To leave the OSD Menu, press Exit.
NOTE:
The digits being input will display as asterisks (*).

Disabling the Password Function

1. Press Menu to open the OSD Menu and go to:
Power On Lock.
2. Press to select Off.
/
3. The message, "Input Password" will appear. Enter the current password.
ͫ If the password is correct, the OSD Menu returns to the Password page with
"Off" shown in the row of Power On Lock.
ͫ If the password is incorrect, a password error message will appear for 5
seconds followed by the message, 'INPUT CURRENT PASSWORD'. You can
try again or press Exit to cancel.
NOTE:
Please keep the old password, as you will need it to reactivate the password
function.
SYSTEM
SYSTEM
18
> Security Settings >
> Security Settings >