Listening To The Radio - Sony CDX-G1053UR Operating Instructions Manual

Listening to the Radio

Listening to the Radio
Tuning step setting is required (page 6).
To listen to the radio, press SRC to select
[TUNER].
Storing automatically (BTM)
1
Press MODE to change the band
(FM1, FM2, FM3, AM1 or AM2).
2
Press MENU, rotate the control dial
to select [GENERAL], then press it.
3
Rotate the control dial to select
[BTM], then press it.
The unit stores stations in order of
frequency on the number buttons.
Tuning
1
Press MODE to change the band
(FM1, FM2, FM3, AM1 or AM2).
2
Perform tuning.
To tune manually
Press and hold SEEK +/– to locate the
approximate frequency, then press SEEK
+/– repeatedly to fine adjust to the
desired frequency.
To tune automatically
Press SEEK +/–.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Storing manually
1
While receiving the station that you
want to store, press and hold a
number button (1 to 6) to display
[MEM].
Receiving the stored stations
1
Select the band, then press a
number button (1 to 6).
7
GB