Channel Setting - Denver DFT-1932DVBT User Manual

Channel Setting

1. Press the DVB-MENU on the remote control or on the front panel to bring up the main
menu on the screen and use CH+/-
to select the Channel Setting menu.
2. Press the OK to confirm your selection and there have a Channel Setting menu on
screen.
Channel Scan
Use the CH+/- to select Channel Scan item and then press OK to confirm it.
Scan Type
Press and then use CH+/- to select one of the search type options: Auto Scan/ Manual
Scan/ Scan By NIT
Channel
Input the number directly to select the channel number, but the range of channel is 1 ---
69.
Frequency KHz
This function let you know the frequency accordance the channel.
Bandwidth
Press and then use CH+/- to select one of the band width options: 7M/ 8M.
Encrypted Progr.
Press and then use CH+/- to select one of the encrypted service options: Save/ Not
Save.
Scan Mode
Press and then use CH+/- to select one of the update mode options: Append/
Replace.
Start Scan
Press OK to start scan.
OK
Sort Channels
-Use the CH+/- to select Sort Channel item and then press OK to confirm it
Name Upward
Press OK to rise to the channel list by name.
Name Downward
Press OK to drop the channel list by name.
Encrypt
-27 -