Preferences / Audio Settings - Sanyo DVR-V100E User Manual

PREFERENCES / Audio Settings

Follow the same procedure as 'Video' Settings to select 'Audio' Settings.
Digital Output
1
Use [.../†] to select 'Digital Output' while the 'Audio' submenu is
displayed.
2
Press [ENTER] or [√] to go to the second level.
3
Use [.../†] to select the desired digital output type.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
Off
No signal will be output from the Digital Audio Out jacks.
LPCM
Select when connected to a 2 channel digital stereo amplifier. The DVD
Recorder+VCR's digital audio signal will be output in the PCM 2ch format
when you play a DVD (or VHS tape) recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD
is recorded with a DTS sound track then no sound will be heard.
Bitstream
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby
Digital or DTS decoder).
Dynamic Range
While watching DVD movies, you may wish to compress the dynamic
range of the audio output (the difference between the loudest and
quietest passages). This allows you to listen to a movie at a lower
volume without losing clarity of sound. Set 'Dynamic Range' to Low or
High for this effect.
Follow the same procedure as 'Digital Output' to set the 'Dynamic
Range'.
Virtual Surround
You can enjoy a simulated 3D effect from two speakers by setting Virtual
Surround to On.
Follow the same procedure as 'Digital Output' to set the 'Virtual
Surround' option.
28
Initial Setup
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move ...†
Audio
Digital Output Bitsteam
Select Digital
Dynamic Range Off
Output
Virtual Surround Off
Off
Bitstream
LPCM
Instructions
Enter-Confirm Setup-Exit Move ...†
Audio
Digital Output Bitsteam
Dynamic Range Off
Select Dynamic
Virtual Surround Off
Range
Off
Low
Instructions
High
Enter-Confirm Setup-Exit Move ...†
Audio
Digital Output Bitsteam
Dynamic Range Off
Virtual Surround Off
Select Virtual
Surround
Off
Instructions
On
Enter-Confirm Setup-Exit Move ...†