Dukane 6543WL User Manual page 33

USING THE PROJECTOR
Gamma
Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
‡ Film: For home theater.
‡ Video: For video or TV source.
‡ Graphics: For PC / Photo source.
‡ Standard(2.2): For standardized setting.
‡ 1.8 / 2.0 / 2.4 / 2.6: For specific PC / Photo source.
Note: If the Display Mode setting is set to DICOM SIM., HDR SIM., or HLG SIM., user cannot select Gamma
setting.
Color Settings
Configure the color settings.
BrilliantColor
‡
enable higher brightness while providing true, more vibrant colors in picture.
‡ Color Temperature: Select a color temperature from Warm, Standard, Cool, or Cold.
‡ Color Matching: Select the following options:
± Color: Adjust the red, green, black, cyan, yellow, magenta, and white level of the image.
± Hue / R(red)*: Adjust the color balance of red and green.
Note:
± Saturation / G(green)*: Adjust a video image from black and white to fully saturated color.
Note:
± Gain / B(blue)*: Adjust the image brightness.
Note:
± Reset: Return the factory default settings for color matching.
± Exit: Exit the "Color Matching" menu.
‡ RGB Gain/Bias: This settings allows to configure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the "RGB Gain/Bias" menu.
‡ Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
‡ Color Space (HDMI input only): Select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
: This adjustable item utilizes a new color-processing algorithm and enhancements to
TM
*If the Color setting is set to White, you can adjust the red color setting.
*If the Color setting is set to White, you can adjust the green color setting.
*If the Color setting is set to White, you can adjust the blue color setting.
33
English