Channel Preset - Toshiba 14SV2M Service Manual

CHANNEL PRESET

Use this function when:
• You cannot find the channel you want
using "Selecting the channel" on page 9.
• The color or sound is strange.
Technical Term
Channel: The number or abbreviation of
the broadcast station frequency
in each country (Channel 5,
Channel 8, Arts Central, Channel U
etc.)
Position: The number on your TV given
to stored channels (0~199). It is
displayed on the upper right of
the screen.
Auto search memory (ASM)
All the channels that can be received are
preset automatically.
1 Select the starting position for ASM. Press
(0~9) or CHs/t.
2 Set the correct broadcast system for your
region. Press MENU and ; –/+ to call up the
"SET UP" menu D7 . Set "COLOR" to
"AUTO" and set "SOUND" according to the
table above using CHs/t and ; –/+.
3 Press MENU and ; –/+ to call up the
D8 . Select "ASM", then
"TUNING" menu
press ; + to start the search. When the TV
screen returns to the start position, the
procedure is complete.
Manual Search and Changing the
assigned position
For easy Channel selection, the chosen
Position should have the same number as
Channel stored there. For this operation, you
may use the "SEARCH" and "SKIP" functions.
Example : Presetting Channel 12 to Position 12
Method 1 - Manual Search
1 Select Position 12.
Press CH s/t repeatedly until 12 is displayed.
Or, press -/-- twice to display "--" on the
screen then press the "1" and "2" buttons
in this order.
2 Press MENU and ; –/+ to call up the
"TUNING" menu D8 . Press CH s/t and
select "SEARCH". Press ; –/+ to
search. Pressing "-" searches for channels
at lower frequencies while pressing
"+" searches for channels at higher
frequencies.
3 When Channel 12 is found, press CH s/t to
select "MEMORY". Press "+" to complete
the presetting.
Method 2 - Store Position
1 Select Channel 12.
Press (0~9) or CH s/t to find the position
preset for Channel 12.
2 When Channel 12 is selected, press
MENU and ; –/+ to call up the "TUNING"
menu D8 . Press CH s /t
"POSITION". Press ; –/+ and set
"POSITION" to P012. Pressing "-" and "+"
respectively decreases and increases
the position number.
3 When Position 12 is found, press CH s/t
to select "MEMORY". Press "+" to complete
the presetting.
Skip Function
If you set "SKIP ON" for unnecessary
position numbers, these will be skipped
when selecting channels using CH s/t.
Example : Skipping Channel 13
1 Select Position 13 using the same method
for selecting Position 12 (above).
2 Press MENU and ; –/+ to call up the
"SET UP" menu D7 . Press CHs/t and
select "SKIP". Press ; –/+ to switch
the "SKIP" setting from "OFF" to "ON".
This completes the setting for skipping
Position 13.
– 15 –
and select