Channel Preset - Toshiba 21SZ5E1 Service Manual

CHANNEL PRESET

Use this function when:
•
You cannot find the channel you want using
"Selecting the channels" on this page.
•
The color or sound is strange.
Technical Term
Channel: The number or abbreviation of the
broadcast station frequency in each
country (Channel 5, Channel 8, Arts
Central, Channel U etc.)
Position: The number on your TV given to
stored channels (0~199). It is
displayed on the upper right of the
screen.
Auto search memory (ASM)
All the channels that can be received are preset
automatically.
1 Select the starting position for ASM. Press (0~9)
or CHs/t.
2 Set the correct broadcast system for your
region. Press MENU and
"SET UP" menu D7 . Set "COLOR" to "AUTO"
and set "SOUND" according to the table on page
8 using CHs/t and
; –/+
3 Press MENU and
; –/+
menu D8 . Select "ASM", then press
the search. When the TV screen returns to the
start position, the procedure is complete.
Manual Search and Changing the
assigned position
For easy Channel selection, the chosen Position
should have the same number as Channel stored
there. For this operation, you may use the
"SEARCH" and "SKIP" functions.
Example : Presetting Channel 12 to Position 12
Method 1 - Manual Search
1 Select Position 12.
Press CH s/t repeatedly until 12 is displayed.
Or, press -/-- repeatedly to display "--" on the
screen then press the "1" and "2" buttons in this
order.
to call up the
; –/+
.
to call up the "TUNING"
to start
; +
– 15 –
2 Press MENU and
;
"TUNING" menu D8 . Press CH s/t and
select "SEARCH". Press
Pressing "-" searches for channels at lower
frequencies while pressing "+" searches for
channels at higher frequencies.
3 When Channel 12 is found, press CH s/t to
select "MEMORY". Press "+" to complete the
presetting.
Method 2 - Store Position
1 Select Channel 12.
Press (0~9) or CH s/t to find the position preset
for Channel 12.
2 When Channel 12 is selected, press MENU
a n d t o c a l l u p t h e " T U N I N G " m e n u
; – / +
D8 . Press CH s/t and select "POSITION".
Press and set "POSITION" to P012.
; –/+
Pressing "-" and "+" respectively decreases and
increases the position number.
3 When Position 12 is found, press CH s/t to
select "MEMORY". Press "+" to complete the
presetting.
Skip Function
If you set "SKIP ON" for unnecessary position
numbers, these will be skipped when selecting
channels using CH s/t.
Example : Skipping Channel 13
1 Select Position 13 using the same method for
selecting Position 12 (above).
2 Press MENU and
; –/+
menu D7 . Press CH s/t and select "SKIP".
Press to switch the "SKIP" setting from
; –/+
"OFF" to "ON". This completes the setting for
skipping Position 13.
– / + t o c a l l u p t h e
to search.
; –/+
to call up the "SET UP"