Wheel And Deck Zerks; Front Wheel Mount; Front Wheel Bearings; Deck Spindles - Husqvarna RZ4623 Operator's Manual

Wheel and Deck Zerks

Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.

Front Wheel Mount

Lubricate 3-4 strokes with a grease gun on each set of
wheel bearings.

Front Wheel Bearings

Lubricate 3-4 strokes with a grease gun on each set of
wheel bearings.
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into contact
with belts or belt pulley drive surfaces.

Deck Spindles

Lower the cutting deck completely.
If a grease gun without rubber hose is used, the foot
plate must be removed.
Lubricate with a grease gun, 2-3 strokes per spindle.

Transmission

The transmission is maintenance free with no need for
level checks or oil changes. If a leak occurs, replace
the unit or contact your Husqvarna dealer.
LUBRICATION
Lubricating the front wheels
Deck spindle
8058-068
8058-136
45