Tire Pressures; Anti-Scalp Rollers - Husqvarna RZ4623 Operator's Manual

Tire Pressures

All tires should be at 15 psi / 103 kPa / 1 bar.

Anti-scalp Rollers

IMPORTANT INFORMATION
Adjust anti-scalp rollers with the mower on a
flat level surface.
Anti-scalp rollers are properly adjusted when they are
just slightly off of the ground when the deck is at the
desired cutting height in the operating position. Anti-
scalp rollers then keep the deck in the proper position
to help prevent scalping in most terrain conditions.
Anti-scalp rollers can be set in four positions. The
rollers should be approximately ¼" (6.5 mm) from
ground. Do not adjust the rollers to support the deck.
IMPORTANT INFORMATION
To avoid deck damage, the anti-scalp rollers
must not be adjusted to support the deck.
MAINTENANCE
Check tire pressures
Anti-scalp rollers
8011-564
8058-135
39