Table of Contents
Advertisement
Dry the appliance.
13.
→ "After using steam operation", Page 18
Note: Following a power cut, the calibrated settings are
retained.
8 Basic operation
8.1 Switching on the appliance
Press
to switch the appliance on.
▶
a The display shows the menu.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance automatically switches itself off if it is not
used for a certain period of time.
Press
to switch the appliance off.
▶
a The appliance switches off. Any functions currently
in progress are cancelled.
a The time or residual heat indicator appears on the
display.
8.3 Starting the operation
You must start each operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
Do not use the appliance if there is water on the
▶
cooking compartment floor.
Wipe away any water on the cooking compartment
▶
floor before operation.
Use
to start the operation.
▶
a The settings appear on the display.
8.4 Interrupting the operation
You can interrupt the operation and then continue
again.
To interrupt the operation, press
1.
Press
again to resume operation.
2.
8.5 Setting an operating mode
After you have switched on the appliance, the menu
appears on the display.
To scroll through the various selection options,
1.
swipe to the left or right on the display.
To select a function, press the corresponding tile.
2.
a Depending on the function, possible adjustment val-
ues or other tiles are available for selection.
If required, press on another tile.
3.
To change the adjustment values:
4.
Swipe over the blue adjustment line or push the
‒
adjustment line to the appropriate point.
Or press
and enter the value directly via the
‒
number field that appears.
Use
to start the operation.
5.
If the operation is ended:
6.
If required, you can select other settings and re-
‒
start the operation.
To adjust the appliance to a new installation location
after moving house, reset the basic settings to the fact-
ory settings. Restart the calibration process.
Tip: You can save your settings as "Favourites"
use these again.
→ "Favourites", Page 20
8.6 Setting the type of heating and the
temperature
1.
2.
3.
4.
a The appliance starts heating.
a The adjustment values and how long the appliance
5.
Note: The most suitable type of heating for your food
can be found in the type of heating description.
→ "Types of heating", Page 8
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
1.
2.
.
3.
4.
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
1.
2.
3.
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
1.
a If information is available, this is displayed for a few
When the food is ready, use
‒
pliance off.
Press "Types of heating".
Press the type of heating that you want to use.
Set the temperature using
ment bar. Or enter the temperature directly via the
number field
.
If required, you can implement additional settings:
– → "Rapid heating", Page 14
– → "Time-setting options", Page 14
– → "Steaming", Page 16
Use
to start the operation.
has already been in operation are shown on the dis-
play.
When the food is ready, use
ance off.
Press
.
Press
.
Press the type of heating that you want to use.
Reset the operation and use
Press the temperature.
Change the temperature using
justment bar. Or enter the temperature directly via
the number field
.
Press "Apply".
Press .
seconds.
Basic operation en
to switch the ap-
and
or
or via the adjust-
to switch the appli-
to start.
or
or via the ad-
13
Advertisement
Table of Contents
