Table of Contents
Advertisement
3.2. Install Procedure for Windows XP
Important Notice
In order to make right use of WPA, please ensure that your current Wireless Adapter's driver, and
Wireless Utility can support it, WPA needs 802.1x authentication (when RADIUS mode is chosen),
though the Operating System must also support 802.1x protocol. For Microsoft's OS family, only
Windows XP has incorporated this by default. The rest of the OS must installed 3er party's client
software such as Funk ODySSey.
Note: Do not insert the WLAN Adapter until you are asked to do so, failure of which may result in unsuccessful
installation of your WLAN device.
1. Insert the given Installation CD in the CD-ROM and then click on the Install Config Utilities.
Follow the instruction to finish the installation.
2. Insert your WLAN card into PCMCIA/PCI slot or USB connector of your system, and then system
will detect new hardware.
Select "Install the software automatically (Recommended) ", and then click Next to continue.
User's Guide
7
Advertisement
Table of Contents
