Siemens SITOP UPS1600 Getting Started page 19

Assigning the UPS1600 to the S7 IO controller
1. Keeping the mouse key pressed, drag a connection from the green input symbol of the
2. Double-click on the UPS1600 to display it in the device view in the work cell.
SITOP UPS1600 under STEP 7 V13
Getting Started, 06/2014
UPS1600 to the green input symbol of the S7 IO controller in which the PROFINET cable
to the UPS1600 is inserted.
Note
Ensure that you establish the connection to the PROFINET input of the IO controller. A
connection to the Ethernet input of the IO controller will lead to errors later on.
The connection is graphically shown.
Installing and configuring the SITOP UPS1600 in STEP 7 V13
19