Table of Contents
Advertisement
3 Load drives in the drive trays.
• For 3.5" drives: Remove the fastening panels from the sides of the drive tray. Place the drive in the drive
tray. Then insert the fastening panels to secure the drive in place.
• For 2.5" drives: Remove the fastening panels from the sides of the drive tray and store them in a safe
place. Place the drive in the area of the drive tray indicated by a blue rectangle below, turn the tray upside
down, and then tighten the screws provided to secure the drive in place.
4 Insert the loaded drive tray into the empty drive bay. Make sure the side marked "UP" is facing up, and insert
the drive tray into the empty drive bay. You should hear a click when the tray is locked in place.
10 Chapter 2: Hardware Setup
Advertisement
Table of Contents
