[2] Connect to the Network Media
Simply plug one end of the cable (RJ-45 connector) into
an available hub/switch port, and plug the other end
(RJ-45 connector) into the RJ-45 port of your 32-bit
CardBus 10/100Mbps Fast Ethernet PC Card.
Card Removal
Use the computer's PC Card Eject mechanism to unseat
the 32-bit CardBus 10/100Mbps Fast Ethernet PC Card
from the computer's PC Card slot. The PC Card will
then protrude from the PC Card slot and you can easily
remove the PC Card by gripping its protruding end and
withdrawing it from the PC Card receptacle.