Network Diagnostics - TRENDnet TE100-PCBUSR User Manual

proceeding to Step 3.
3. The Configuration Data screen also features a
Diagnostic Menu. Follow the cues at the foot of the
screen to select and run the Adapter Basic
Diagnostic program.
results will appear onscreen. In the loopback test,
test signals are intercepted and reflected at the MAC
level without reaching the network cable.
results are normal, then go ahead to the Network
Operation test, starting with Step 4.

Network Diagnostics

4. Insert the 32-bit CardBus 10/100Mbps
Ethernet PC Card driver CD into an available drive of
an initiator station on your LAN. At the DOS prompt
(here shown as >), key in:
D: \Rset\ENCBRSET.BAT and <Enter>.
5. Remove the 32-bit CardBus 10/100Mbps
Ethernet PC Card driver CD from your station's (the
initiator station's) CD-ROM, and insert it into an
available drive of a responder station on your LAN. At
the DOS prompt (here shown as >), key in:
> D: \Rset\ENCBRSET.BAT and <Enter>.
The opening screen of the Diagnostic program
will appear onscreen at the responder station.
Follow the cues at the foot of the screen to
The adapter function test
10
If the
Fast
Fast