TE100-S4PCI
4-port 10/100Mbps N-way Ethernet Switch Card
The TE100-S4PCI is a 4-port 10/100Mbps Fast Ethernet
Switch Card for the PCI bus. This device integrates 4
10/100Mbps Fast Ethernet switch ports into a 10/100Mbps
PCI card. With Plug-and-Play function, you can easily install
and configure the switch card automati-cally. The N-way ports
auto-negotiate between 10Mbps and 100Mbps, as well as
between half- and full-duplex modes, which allows the speed
up to 200Mbps. Ideal for small workgroups, you can
experience two-in-one function with TRENDnet's switch card.
FEATURES
Complies with IEEE 802.3 10Base-T and IEEE 802.3u
100Base-TX standards
Complies with ANSI/IEEE 802.3 N-way auto-negotiation
4 RJ-45 connectors for four network segment connections
Port 4 supports MDI-II or MDI-X (push button)
PCI bus master memory access for high throughput and
low CPU demand
Plug and Play installation
Half- and full-duplex with auto-negotiation
Data forwarding and filtering rate for 10/100Mbps speed
Up to 1K active MAC address entry table with self-
learning and table-aging
1 MB RAM buffer per device
Store-and-forward packing switching method
Compatible with all major network operating systems
5 Year Warranty
TRENDnet
TRENDware, USA
What's Next in Networking
BENEFITS
Performance:
Operate in the 32-bit bus master mode,
delivering throughputs as multi-
megabits per second with little stress on
the host's CPU.
Flexibility:
Provides PCI Ethernet card and
integrated switch in one unit for high-
performance and cost-effectiveness.
Speed:
Supports 10/100Mbps and make it ideal
for high-speed server when the speed
increases up to 200Mbps with full-
duplex mode.
Compatability:
Compatible with major operating
systems.
TE100-S4PCI (11-17-2002)