Diagnostics - TRENDnet TE100-PCBUSR User Manual

Diagnostics

If you experience any problems with the 32-bit CardBus
10/100Mbps Fast Ethernet PC Card, first verify that the
appropriate driver is loaded, that the proper grade of
cable is employed for the network connection, and that
the supporting hub/switch is functioning properly.
1. As certain that the 32-bit CardBus 10/100Mbps
Fast Ethernet PC Card is fully and firmly seated in
the 32-bit CardBus PC Card slot.
2. Check the length and rating of connecting cables.
3. Replace the adapter in question with a verified
adapter and run ENCBRSET.BAT diagnostic tests
on the CD-ROM at directory of \Rset\.
4. Install the questioned adapter in another notebook
PC and run the tests again.
Remove all other PC Card from the notebook PC and run
the tests again. If the diagnostic run is abnormal, then
there is probably an interrupt number conflict that will
8