Use The Emulator - Delta-T Devices SunScan SS1 User Manual

Use the Emulator

When first run, SunData is set to work in its Emulator mode
This mode simulates having a SunScan attached (with and without an
external beam fraction BFS sensor).
1) Turn on PDA without SunScan attached.
2) Select the SunData Program from the Start menu.
This starts the program and displays the Title page
showing the current settings.
3) Press Continue on the touch sensitive screen.
4) Press Read.
You may add a note if you wish.
5) Press Store.
Congratulations, you appear have taken your first reading!
Note: The transmitted value is chosen randomly.
Press the button repeatedly, not too quick, to be taken automatically
around the Read and Store cycle.
Use this opportunity to explore all the SunData options.
Later you will learn how to change and save your settings.
For definitions see the Glossary on page 76.
2
To re-enable the Emulator mode, see Change SunData Settings on page 16.
14  Quick Start
2
.
SS1 User Manual v3.3