Carrier AquaSnap 30AWH-R Installation And Operation Manual page 19

4 Capacity test setting
5 3-way valve type select
6 DI1
7 DI2
8 DI3
9 DI4
10 DO1
11 DO2
12 DO3
Eco mode cooling
13
setpoint offset
Away mode cooling
14
setpoint offset
Eco mode heating
15
setpoint offset
Away mode heating
16
setpoint offset
Eco mode DHW
17
setpoint offset
Minimum OAT
18
for heating
Booster OAT
19
Threshold
Heat pump
20
warmup time
Booster Delta
21
temperature
22 Second zone setting
3. Configuration
d. Press "confirm" \to set MaxWSP, and press "up" or "down" to set the value of
MaxWSP;
e. Press "confirm" to go to step
Press the "up" or "down" button to set the heating climate offset from -5~5
o
as 0 C; then press "confirm" to confirm and exit or "setting" button to go to the next
0
item.
Reserved
0 - Normal open
1 - Normal closed
0- Disable
1 - Power limitation (night mode)
2 - Load-shed
3 - DHW request
4 - Anti-legionella request
5 - HDW priority
0 - Disable
1 - Unit in alarm
2 - Unit in standby
3 - Unit running
4 - Unit in cooling
5 - Unit in heating
6 - Unit in DHW
7 - Unit in defrost
8 - Unit controlled by Modbus
If air setpoint is chosen, it is air setpoint offset, otherwise, it is water setpoint offset
0~10 C, default as 2 C
0 0
If air setpoint is chosen, it is air setpoint offset, otherwise, it is water setpoint offset
0~10 C,, default as 4 C15
0 0
If air setpoint is chosen, it is air setpoint offset, otherwise it is water setpoint offset
-20~0 C, default as -2 C
0 0
If air setpoint is chosen, it is air setpoint offset, otherwise, it is water setpoint offset
-20~0 C, default as -4 C
0 0
-10~0 C, default as -5 C
0 0
-26~10 C, default as -26
0 0
-20~15 C, default as -14
0 0
0~120min, default 60min
1~20 C, default 10 C
0 0
0 – No bi-zone function
1- Bi-zone function for heating mode only
2-Bi zone function for both cooling and heating modes
.
o
C
C
17
C, default
0