Silvercrest 344949 2004 Operating Instructions Manual page 18

6) Slide the on/off/direction switch
The selected direction of rotation is shown by the coloured LED
direction indicator
–
Green LED = anti-clockwise
–
Red LED = clockwise
7) The appliance operates at the slowest speed.
NOTE
► Always select the direction of rotation for treating the nails in
their direction of growth. If possible, treat the nails from the
outside towards the inside (to the nail tip). Otherwise, the nails
will split more easily.
► If you feel that the nails could crack during treatment, select
the other direction.
8) You can now start working.
WARNING! RISK OF BURNS!
Risk due to severe heat development!
► While you are working, never let the attachments remain in one
location. Friction leads to increased heat generation and may
cause injuries.
► Always work with a circular motion.
9) Move the on/off/direction switch
power adapter
finished the treatment.
NOTE
► If you have treated hardened skin, apply a moisturising cream
to the treated areas after completing the procedure.
SMPS 7 D2
as follows:
4
from the mains power socket when you have
8
in the desired direction.
5
to "0" and disconnect the
5
GB │ IE │ NI │ CY │
15 ■