Silvercrest 344949 2004 Operating Instructions Manual page 16

■ Felt cone
11
For smoothing and polishing nail edges after filing, and for clean-
ing the nail surface.
♦ Use the felt cone
and to clean the nail surface after grinding. Always polish in
a circular motion and never let the felt cone
place.
■ Sapphire disc
For filing and working the nails.
Work the edge of the nail using the sapphire disc
only the inner disc rotates and the outer edge does not move, you
can file your nails accurately without damaging your skin with the
rapidly rotating disc.
♦ Always work from the outside of the nail to the tip.
■ Flame miller
You can use the flame miller
♦ Guide the flame miller
and cut away the affected nail part.
■ Cylindrical miller
For grinding off thick toenail surfaces and rough smoothing of the
surfaces.
You can use the cylindrical miller
nail surfaces.
♦ Always hold the cylinder miller
and apply light pressure and circular movements to remove
the excess growth.
SMPS 7 D2
:
to polish and smooth the edge of the nail
11
/ :
12 13
:
14
14
:
15
to free ingrown nails.
14
carefully onto the treatment area
to mill away thickly growing
15
parallel to the nail surface
15
GB │ IE │ NI │ CY
stay in one
11
/ . Since
12 13
│
13 ■