Using Optional Accessories; Sewing Buttons - Brother L14s Operation Manual

USING ATTACHMENTS AND APPLICATIONS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

USING OPTIONAL ACCESSORIES

L

Sewing buttons

Stitch
Stitch Length
Pattern
Name [mm
(inch)]
2
Zigzag 0.7
Stitch (1/32)
3
Zigzag 1.5
Stitch (1/16)
4
Zigzag 2
Stitch (1/16)
Measure the distance between the
1
buttonholes and set the pattern selection
dial to the Zigzag Stitch with the desired
width.
Turn off the machine.
2
Change the foot to the button sewing foot
3
"M".
Place the darning plate on the needle
4
plate.
Turn on the machine.
5
CAUTION
●
Do not turn on the machine while pressing
down the foot controller. The machine
may start unexpectedly and cause
personal injury or damage to the machine.
37
Stitch
Width
Foot Other
[mm
(inch)]
Button
1.8 Sewing Darning
(1/8) Foot Plate
"M"
Button
3.3 Sewing Darning
(3/16) Foot Plate
"M"
Button
5 Sewing Darning
(3/16) Foot Plate
"M"
Put a button between the foot and the
6
fabric and make sure that the needle enters
the holes without hitting the button. If it
hits, see step .
1
At a slow speed, sew about 10 stitches.
7
CAUTION
●
Make sure the needle does not hit the
button during sewing. The needle may
break and you may be injured.
Pull the upper thread at the end of the
8
stitching to the wrong side of the fabric,
and then tie it with the bobbin thread.

Use scissors to cut the upper thread and
the bobbin thread at the beginning of the
stitching.