Table of Contents
Advertisement
For the installation of the circular
panel
Making a circular opening on the ceiling
Use a paper compass printed on the indoor unit package.
(attached inside to the upper part)
1 Use a bolt or a pin to fix pivot point of the paper
compass on center of the ceiling. (in the middle of
location for installation)
2 Put a pencil at the opposite side of the pivot point
fixed in place.
3 Rotate the paper compass on its pivot point to draw a
line on the ceiling.
4 Rotate the paper compass diametrically to draw a
circle on the ceiling.
For the painting of the panel
• Make sure to only apply paints and varnishes for resins
(ABS, HIPS) or paint thinners.
• If you apply lacquers for general use on the panel, it
may lead to discoloration or erosion on the surface of
the panel.
35
English
Advertisement
Table of Contents
