Toshiba TECRA C50-C Series User Manual page 26

Hide thumbs Also See for TECRA C50-C Series:
Table of Contents

Advertisement

Either a 2-pin or 3-pin adaptor/cord is included with the computer
depending on the model.
2.
3.
Opening the display
The display panel can be opened to a wide range of angles for optimal
viewing.
While holding down the palm rest with one hand so that the main body of
the computer is not raised, slowly lift the display panel. This will allow the
angle of the display panel to be adjusted to provide optimum clarity.
User's Manual
Figure 2-1 Connecting the power cord to the AC adaptor (2-pin plug)
Figure 2-2 Connecting the power cord to the AC adaptor (3-pin plug)
Connect the DC output plug of the AC adaptor to the DC IN 19V jack
on your computer.
Figure 2-3 Connecting the DC output plug to the computer
1. DC IN 19V jack
Product appearance depends on the model you purchased.
Plug the power cord into a live wall outlet. The DC IN/Battery indicator
glows.
1
2. DC output plug
2
2-4

Advertisement

Table of Contents
loading

Table of Contents