Toshiba Hwsetup - Toshiba TECRA C50-C Series User Manual

or:
C:\Program Files (x86)\TOSHIBA\PasswordUtility\
This utility lets you do the following:
Starting the computer using a password
If you have already registered a user password, there is one way to start
the computer:
The password is necessary only if the computer was shut down in
Hibernation mode or boot mode. It is not needed in Sleep mode and
Restart.
To enter a password manually, do the following:
1.
At this point, the function keys do not work. They will function after you
enter the password.
2.
3.
If you enter the password incorrectly three times in a row, or if you do not
enter the password within 1 minute, the computer shuts off. In this case,
some features that can power on the computer automatically (Wake-up on
LAN, Task Scheduler, etc) might not work. You must turn the computer
back on to retry password entry.

TOSHIBA HWSetup

TOSHIBA HWSetup is the TOSHIBA configuration management tool
available through the Windows operating system.
To run TOSHIBA HWSetup, click Start -> All Programs -> TOSHIBA ->
Tools & Utilities -> HWSetup.
The TOSHIBA HWSetup window contains a number of tabs to allow
specific functions of the computer to be configured.
In addition, there are also three buttons: OK, Cancel and Apply.
OK
User's Manual
Register or delete the Supervisor Password.
Specify restrictions for general users.
Enter the password manually.
Turn on the power as described in the
following message appears in the screen:
Password =
Enter the Password.
Press ENTER.
Getting Started
Accepts your changes and closes the TOSHIBA
HWSetup window.
section. The
5-8