TRENDnet TEW-633GR User Manual page 34

Conflicting rules are not permitted. Conflicting rules are those that share any combination of
source address/port, destination address/port, and protocol. Rejecting conflicting rules ensures
that every flow defined in a rule receives the expected priority and avoids indeterminate
prioritization that could reduce QoS effectiveness.
Name
Create a name for the rule that is meaningful to you.
Priority
The priority of the message flow is entered here -- 1 receives the highest priority (most
urgent) and 255 receives the lowest priority (least urgent). Priority 0 is reserved. Flows
that are not prioritized by any rule receive lowest priority.
Protocol
The protocol used by the messages. The common choices can be selected from the
drop-down menu. To specify any other protocol, enter its protocol number
the IANA) in the Protocol box.
Source IP Range
The rule applies to a flow of messages whose LAN-side IP address falls within the range
set here.
Source Port Range
The rule applies to a flow of messages whose LAN-side port number is within the range
set here.
Destination IP Range
The rule applies to a flow of messages whose WAN-side IP address falls within the range
set here.
Destination Port Range
The rule applies to a flow of messages whose WAN-side port number is within the range
set here.
Add/Edit StreamEngine Rule
Enable
Each entry in StreamEngine Rules List can be active (enabled) or inactive (disabled)
Save
Saves the new or edited StreamEngine Rule in the following list. When finished updating
the StreamEngine rules, you must still click the Save Settings button at the top of the
page to make the changes effective and permanent.
StreamEngine Rules List
The section shows the currently defined StreamEngine rules. A StreamEngine rule can be
changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the
Edit icon, the item is highlighted, and the "Edit StreamEngine Rule" section is activated for
editing.
(as assigned by
34