Cooler Temperature Settings; Stand-By Mode - SchaubLorenz SL SE311WE User Manual

How to Use
• Screen saver mode will be activated
automatically after 30 seconds.
• If you press any key while the lighting
of the control panel is off, the current
machine settings will reappear on the
display to let you make any change you
wish.
• If you do not cancel the screen saving
mode or press any key for 30 seconds,
control panel will remain off.
To deactivate the screen saving mode,
• To cancel the screen saving mode, first of
all, you need to press any key to activate
the keys and then press and hold
the Mode button (#3 on control panel
diagram) for 3 seconds.
• To active the screen saving mode,
you need to press mode button
simultaneously 3 seconds
• To reactivate screen saving mode, press
and hold the Mode button (#3 on control
panel diagram) for 3 seconds.

3.2.4 Cooler Temperature Settings

Initial temperature value for the cooler
setting indicator is +4 °C.
• Press the cooler button once (#2 on
control panel diagram).
• When you first push this button, the last
value will appear on the cooler setting
indicator (#1).
• Whenever you press this button (#2
on control panel diagram), a lower
temperature will be set. (+8 °C, +6 °C,
+5 °C, +4 °C, +2 °C, and super cool)
• When you push the cooler set button until
the super cool symbol (#5) appears, and
if you do not push any button within 1
second, super cool will flash.
• If you continue to press the button (#2 on
control panel diagram), it will restart from
+8 °C.
• The temperature value selected before
super cool mode or economy mode
is activated and will remain the same
when the mode is over or cancelled. The
appliance continues to operate with this
temperature value.
Recommended Temperature Values for
Cooler
When to adjust
For cooling the fridge at
minimum capacity
In normal usage
For cooling the fridge at
maximum capacity
Note:Some built-in appliances may have a

stand-by mode.

3.2.5 Stand-By Mode
Purpose
This mode can be used to save energy
when you go on vacation.
How Would It Be Used?
*Select "8" set value.
*Push mode and cooler Set Button for 5
seconds.
*Display will show "St" "bY" on the screen.
During This Mode:
In stand-by mode; all components will be
disabled.
If you push the display button, display
will show "St" "bY" on the screen to show
stand-by mode is active.
To cancel; push mode and cooler set button
for 5 seconds.
After the mode is deactivated, an error
code may light on the display because the
product maybe not cool enough. The error
code will turn off when the product reaches
normal temperature.
EN - 31
Inner
Temperature ( C)
o
8
4, 5, 6
2