Accessory Parts - Toshiba MMU-AP0154SH1-E Installation Manual

SMMS 1-Way Cassette SH Type
CAUTION
New Refrigerant Air Conditioner Installation
• This air conditioner adopts the new HFC refrigerant (R410A)
which does not destroy ozone layer.
• The characteristics of R410A refrigerant are; easy to absorb water,
oxidizing membrane or oil, and its pressure is approx. 1.6 times
higher than that of refrigerant R22. Accompanied with the new
refrigerant, refrigerating oil has also been changed. Therefore, during
installation work, be sure that water, dust, former refrigerant, or
refrigerating oil does not enter the refrigerating cycle.
• To prevent charging an incorrect refrigerant and refrigerating oil, the
sizes of connecting sections of charging port of the main unit and
installation tools are changed from those for the conventional
refrigerant.
• Accordingly the exclusive tools are required for the new refrigerant
(R410A).
• For connecting pipes, use new and clean piping designed for R410A,
and please care so that water or dust does not enter.
(*1) Refer to the "Definition of Qualified Installer or Qualified Service Person."
11-EN
Installation Manual
SMMS 1-Way Cassette SH Type
2

Accessory Parts

Part name
Installation Manual
CD-ROM
Installation pattern
Installation gauge
Pattern fixing screw
Heat insulating pipe
Washer
Hose band
Flexible hose
Heat insulator
Heat insulator
Heat insulator
 Separate sold parts
The Ceiling panel and remote controller are sold separately. For the installation of these products, follow the
Installation Manuals supplied with them.
– 6 –
Q'ty Shape
(Hand over to customers)
1 This manual (For other languages that do not appear in this Installation Manual,
please refer to the enclosed CD-R.)
1 — Installation Manual
1 — For check of ceiling opening and the unit position
For check of ceiling opening and the unit position
1
(Unit with installation pattern)
4 M5 × 16L For mounting of pattern
2 For insulating pipe connecting section
8 M10 × Ø34 For hanging-up of unit
1 For connecting drain pipe
1 For adjustment of drain pipe centering
1 For insulation drain connecting section
1 For sealing of pipe connecting port (With slit)
1 For sealing of pipe connecting port (Without slit)
Installation Manual
Usage
EN
12-EN