Table of Contents
Advertisement
1000Base-SX/LX Intelligent Fiber Modules.
With its build-in Web-based Management, managing and configuring
the Modular Switch becomes easier. From cabinet management to
port-level control and monitoring, you can visually configure and
manage your network via Web Browser. Just click your mouse
instead of typing cryptic command strings. However, the Modular
Switch can also be managed via Telnet, Console, or third-party
SNMP Management.
Key Features
Conforms to IEEE 802.3, 802.3u, 802.3z, 802.3ab and
802.3x standards
4 expansion slots to configure flexible network
One built-in intelligent module with RS-232 console
port ( front side )
Supports Half-duplex mode for backpressure, and
full-duplex for flow-control
Store-and-Forward switching architecture for abnormal
packet filtering
Up to 9.6Gbps Back-plane forwarding rate
Mac address: 4K for 8 port 10/100 TX and Gigabit
module, 12K for 2/4/8 port fiber module.
Packet Buffer: 128Kbyts for 8 ports 10/100TX module, 4
Mbytes for 100FX Fiber module, 128KBytes for Gigabit
module
LED
System Power, Diagnostic
8 ports TX module: 10/100Mbps,Link/Active,
Full-duplex/Collision;
2/4/8 ports Fiber module: Link/Active,
Full-duplex/Collision
Gigabit Module: Link, Active, Full duplex, Collision
Optional different modules including
Gigabit module ( SX/LX ), Gigabit 1000Base-T, 8-port
auto-sensing 10/100Base-TX switch module, 2/4-port
100BaseFX ( ST/SC/MT-RJ/VF-45 ) fiber module, 8-port
100BaseFX ( MT-RJ/VF-45 ) fiber module
5
Advertisement
Table of Contents
