Connection To The Electrical Supply - Respekta AC178IX-18 Installation & Operating Instructions Manual

5.3.3 Glass shelves
To remove the glass shelf, pull the pin under the shelf with both hands and simultaneously pull outwards.
The glass shelf can now be removed.
Glass shelf
5.4

Connection to the electrical supply

Before connecting the appliance to the electrical supply, read the following information:
DANGER: Do not use adapters, multiple sockets or extension leads to connect the
appliance to the electrical supply, to avoid the risk of overheating and fire. The power
cable must be positioned so that it is not in contact with any hot surfaces at any point.
WARNING: A specialised technician must check that the home electrical system is
compatible with the power input of the refrigerator. Check the values shown on the
appliance nameplate.
The home electrical system must be fitted with a single-pole circuit breaker/contactor or
an equivalent device, in compliance with local regulations.
Check the power cable regularly. If the power cable is damaged or must be replaced, this
operation must be carried out only by a specialised technician with suitable tools, to avoid
the risk of injury.
The cable must not be kinked or pinched.
en-30
Lining
Lining
Glass shelf
Fig. 5.4