Flash Streamer And Fireplace Logic Operation; Flash Streamer (Air Cleaning) Operation; Fireplace Logic Operation; To Start/Stop Flash Streamer And Fireplace Logic Operation - Daikin FTXTM30R2V1B Operation Manual

5 Operation
5.9 Flash Streamer and Fireplace logic
operation
5.9.1

Flash Streamer (air cleaning) operation

Streamer generates a high-speed electron stream with a high
oxidizing power, reducing bad odours. Together with the titanium
apatite deodorising filter, silver allergen removal air purifying filter
and the air filters, this function cleans the air in the room.
INFORMATION
▪ The high-speed electrons are generated and go away
inside the unit to ensure safe operation.
▪ The Streamer discharge may generate a fizzing sound.
▪ If the airflow becomes weak, the Streamer discharge
may stop temporarily to prevent ozone smell.
5.9.2

Fireplace logic operation

Use Fireplace logic operation to equally distribute the hot air from an
external heat source (e.g. fireplace) across the room.
INFORMATION
▪ If the set temperature is reached in heating mode, the
operation Fireplace logic will start automatically.
▪ During Fireplace logic operation the indoor unit fan
distributes the hot air from the external source across
the room.
▪ The airflow rate depends on difference between set
temperature and temperature in the room (higher
temperature difference = higher airflow rate).
5.9.3 To start/stop Flash Streamer and
Fireplace logic operation
INFORMATION
Fireplace logic operation can be activated only in heating
operation mode (see "5.2.1 To start/stop operation mode
temperature" [ 4 7])
and to set the
1 Press one or more times.
Result: The setting will change as follows.
Display
+
—
2 To stop operation, press
from the LCD.
5.10

OFF/ON timer operation

Timer functions are useful for automatically switching the air
conditioner off/on at night or in the morning. You can also use OFF
timer and ON timer in combination.
Operation manual
10
Operation
Flash Streamer (air cleaning)
Fireplace logic
Flash Streamer and Fireplace logic
Both deactivated
until both symbols disappear
INFORMATION
Program the timer again in case of:
▪ A breaker has turned the unit off.
▪ A power failure.
▪ After replacing batteries in the wireless remote control.
INFORMATION
The clock MUST be set correctly before using any timer
functions. Refer to "4.3 To set the
5.10.1

24 hour clock OFF/ON timer setting

To start/stop OFF timer operation
1 Press to start.
Result: is displayed on the LCD and
the day of the week disappear from the LCD.
2 Press or to change the time setting.
3 Press again.
Result: and the set time are displayed on the LCD.
Result: The timer lamp lights up.
INFORMATION
Each time or
advances by 10 minutes. Holding the button down will
change the setting rapidly.
4 To stop operation, press
Result: and disappear from the LCD and the timer
lamp goes off. and the day of the week are displayed on the LCD.
INFORMATION
When you set the ON/OFF timer, the time setting is stored
in the memory. The memory will be reset when the
wireless remote control batteries are replaced.
Night set mode
When the OFF timer is set, the air conditioner
automatically adjusts the temperature setting (0.5°C up in
cooling, 2.0°C down in heating) to prevent excessive
cooling/heating and
temperature.
To start/stop ON timer operation
1 Press to start.
Result: is displayed on the LCD and
the day of the week disappear from the LCD.
2 Press or to change the time setting.
3 Press again.
Result: and the set time are displayed on the LCD. The timer
lamp lights up.
clock" [ 4 6].
blinks.
is pressed, the time setting
.
ensure a comfortable sleeping
blinks.
FTXTM-R, FTXTM-S
Daikin room air conditioner
3P717028-3B – 2023.03
and
and