Polaris Sportsman 570 Owner's Manual For Maintenance And Safety page 104

MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 98. Items not listed in
the chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item
Engine Oil
(450/570)
Brake Fluid
Transmission Oil
Demand Drive
(Front Gearcase)
Front Prop Shaft
Yoke
102
Lube
PS-4 5W-50
4-Cycle Oil
DOT 4 Brake Fluid
AGL Gearcase
Lubricant &
Transmission Fluid
Demand Drive
Fluid
U-Joint Grease
Capacity at Inspection Procedure
Fluid Change
2 qt. (1.9 l) Maintain level in safe range
on dipstick. See page 104.
--- Maintain level between fill
lines. See page 36.
32 oz. (948 ml) Maintain level at bottom of fill
hole threads. See page 107.
9 oz. (265 ml) Maintain level at bottom of fill
hole threads. See page 109.
--- Grease fittings (3 pumps
maximum) every 500 miles,
before long periods of
storage, or after pressure
washing or submerging.
Front Prop Shaft Yoke