Canon E3300 Series Online Manual page 295

2114
Cause
Paper size settings at printer driver do not match the paper size registered in the printer.
What to Do
Press the printer's Stop button to cancel printing.
Check if the size of the paper loaded in the rear tray matches the paper size registered in the printer using
the printer's Paper Select button.
After checking the paper settings set at the printer driver, retry printing.
Note
• If the paper size loaded in the rear tray is larger than the paper size set at the printer driver, you can
continue the printing without changing the paper size settings. Press the printer's OK button.
• See below for paper sizes that can be registered in the printer using the printer's Paper Select
button.
Paper Settings
• You can disable the function to prevent printing error. When this function is disabled, the printer uses
the paper settings for printing onto the paper in the rear tray regardless of whether or not the paper
matches these settings.
See below for the printing error prevention setting.
Changing the Printer Operation Mode (Windows)
Changing the Printer Operation Mode (macOS)
295