Changing The Printer Operation Mode - Canon E3300 Series Online Manual

Changing the Printer Operation Mode

If necessary, switch between various modes of printer operation.
1. Check whether the printer is on and select Device settings from
2. If necessary, complete the following settings:
Custom settings - Detect paper setting mismatch
If the check box is deselected, at the time of printing from PC, you can continue to print without the
message display even if the paper settings set in the Print dialog differs from the paper information
registered to the printer.
Ink drying wait time
You can set the length of the printer rest time until printing of the next page begins. The wait time
becomes longer as the value set in the list increases, and shorter as the value decreases.
If the paper gets stained because the next page is ejected before the ink on the printed page dries,
increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.
3. Apply the settings
Click OK.
The printer operates with the modified settings hereafter.
139
Remote UI