Multi Slide Show; Start The Multi Slide Show; Selecting Images - Samsung EC-L200ZSBA User Manual

Table of Contents

Advertisement

Multi slide show (

Images can be displayed continuously at pre-set intervals. You can view the
slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [MULTI SLIDE SHOW]
(
) menu tab.

Start the multi slide show

The multi slide show can start only in the [Show] menu.
1. Use the Up / Down buttons to select the
[Show] menu and press the Right button.
2. Select a desired sub menu by pressing the
Up / Down button.
[Play]
: The multi slide show is
closed after one cycle.
[Repeat Play] : The multi slide show is repeated until cancelled.
3. Press the OK button and the multi slide show will be started.
- To pause the multi slide shown while playing it back, press the play
& pause(
) button again.
- Pressing the play & pause(
slide show restart.
- To stop playback of the multi slide show, press the play & pause
(
) button, and then press the MENU / OK button.
60
)
MULTI SLIDE SHOW
Show
Play
Images
Repeat Play
Effect
Interval
Music
Back
) button again will cause the multi

Selecting Images

You can select image to view
1. Use the Up / Down buttons to select the
[Image] menu and press the Right button.
2. Select a desired sub menu by pressing the
Up / Down button.
[All]
: All images saved in the Memory
are played back.
[Date] : Images taken in a specifi ed date are played back.
Press the Right button and choose the date.
[Select] : Play only the selected images. If you press the Right button,
you can select the desired images to play back. The selected
image can be saved as [Select1], [Select2] and [Select3]. If
you save the selected image with the [New Select] command,
Set
it will be saved as [Select1]. But when a new image is saved
again using [New Select], the former image which had been
saved as [Select1] will be saved as [Select2] automatically.
You can change and cancel the images which were saved as
[Select1], [Select2] and [Select3].
3. Press the OK button and the settings are saved.
4. Select [Play] or [Repeat Play] in the [Show] menu to start the multi slide
show.
MULTI SLIDE SHOW
Show
Images
All
Effect
Date
Interval
Select
Music
Back
Set

Advertisement

Table of Contents
loading

This manual is also suitable for:

L200

Table of Contents