System Requirements; About The Software - Samsung EC-L200ZSBA User Manual

System Requirements

For Windows
PC with processor better than
Pentium II 450MHz
(Pentium 800MHz recommended)
Windows 98SE/2000/ME/XP/Vista
Minimum 128MB RAM
(Over 512MB recommended)
200MB of available hard disk space
(Over 1GB recommend)
USB port
CD-ROM drive
1024x768 pixels, 16bit color display
compatible monitor
(24bit color display recommended)
MicroSoft DirectX 9.0C
78
For Macintosh
Power Mac G3 or later
Mac OS 10.0 ~ 10.4
Minimum 64MB RAM
110MB of available hard-
disk space
USB port
CD-ROM drive
MPlayer (For movie)

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM
drive, the following window should automatically run.
Camera driver : This enables images to transfer between the camera and
PC.
This camera uses the USB Storage Driver as the camera driver. You
can use the camera as a USB card reader. After installing the driver
and connecting this camera to the PC, you can fi nd [Removable Disk]
in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the
Application CD. You can use the camera with Mac OS 10.0~10.4.
XviD codec : This allows movie clips (MPEG-4) recorded with this camera
to be played back on a PC.
To play back a movie clip recorded with this camera, you must install the
XviD codec. If a movie clip recorded with this camera does not play well,
install this codec. This software is only compatible with Windows.
Before connecting the camera to the PC,
you should fi rst install the camera driver.