Starting The Multi Slide Show; Start The Multi Slide Show; Selecting Images - Samsung S1075 Manual

Table of Contents

Advertisement

Starting the Multi Slide Show (

Images can be displayed continuously at pre-set intervals.
You can view the Multi Slide Show by connecting the camera to an
external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [MULTI SLIDE SHOW]
menu tab.

Start the Multi Slide Show

The Multi Slide Show can start only in the [Show Start] menu.
1. Use the Up / Down buttons to select the [Show Start] menu and
press the Right button.
2. Select a desired sub menu by pressing
the Up / Down button.
[Play]
: The Multi Slide Show is
closed after one cycle.
[Repeat Play] : The Slide show is
repeated until cancelled.
3. Press the OK button and the slideshow will be started.
- To pause the slide shown while playing it back, press the play
& pause(
) button again.
- Pressing the play & pause(
Multi Slide Show restart.
- To stop playback of the Multi Slide Show, press the play &
pause (
) button, and then press the OK / Menu button.
)
MULTI SLIDE SHOW
Show Start
Play
Images
Repeat Play
Effect
Interval
Music
Back
Set
OK
) button again will cause the

Selecting Images

You can select image to view
1. Use the Up / Down buttons to select the
[Images] menu and press the Right button.
2. Select a desired sub menu by pressing
the Up / Down button.
[All]
: All images saved in the
Memory are played back.
[Date] : Images taken in a specified
date are played back.
[Select] : Play only the selected images. If you press the Right
button, you can select the desired images to play
back. The selected image can be saved as [Select1],
[Select2] and [Select3]. If you save the selected image
with the [New Select] command, it will be saved as
[Select1]. But when a new image is saved again using
[New Select], the former image which had been saved
as [Select1] will be saved as [Select2] automatically.
You can change and cancel the images which were
saved as [Select1], [Select2] and [Select3].
3. Press the OK button and the settings are saved.
4. Select [Play] or [Repeat Play] in the [Show] menu to start the
multi slide show.
MULTI SLIDE SHOW
Show Start
Images
All
Effect
Date
Interval
Select
Music
Back
Set
OK
63

Advertisement

Table of Contents
loading

Table of Contents