Hafele NAGOLD SERENE FI02 Instruction Manual page 25

Table of Contents

Advertisement

Available languages

Available languages

Dishwasher must be level for proper dish rack operation and wash performance.
1
Place a spirit level on door and rack track inside the tub as shown to check that the
dishwasher is level.
2
level the dishwasher by adjusting the three levelling legs individually.
3
When level the dishwasher, please pay attention not to let the dishwasher tip over.
【 Figure 8 】
Illustration of feet adjustment
NOTE:
The maximum adjustment
height of the feet is 50 mm.
For personal safety:
Do not use an extension cord or an adapter plug with
this appliance.
Do not, under any circumstances, cut or remove the
earthing
Connection from the power cord.
Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply. Use
the required fuse 10 amp , time delay fuse or circuit breaker recommended and provide separate circuit serving
only this appliance.
Check level Front to Back
Ensure the voltage and frequency of the power being corresponds to
those on the rating plate. Only insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug , replace the socket, rather than using a adaptors or the like as they
could cause overheating and burns .
Spirit level
Check level side to side
20

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Nagold 538.21.150

Table of Contents