Tension Adjustment Of The Door Spring; Connection Of Drain Hoses - Hafele NAGOLD SERENE FI02 Instruction Manual

Tension adjustment of the door spring

●
The door springs are set at the factory to the proper tension for the outer door. If aesthetic
wooden panel are installed, you will have to adjust the door spring tension. Rotate the adjusting
screw to drive the adjustor to strain or relax the steel cable(see figure 5).
Door spring tension is correct when
the door remains horizontal in the
fully opened position，yet rises
to a close with the slight lift of a
finger.

Connection of drain hoses

●
Insert the drain hose into a drain pipe with a minimum diameter of 4 0mm , or let it run into the sink , making sure to avoid
bending or crimping it. The top of the hose must be less than 100 0mm .
NOTE
The top of the hose
must be less than
1000mm.
【Figure5】
Tension adjustment
of the door spring
Front
Drain pipe
A
B
φ 40 mm
18
Counter