Table of Contents
Advertisement
Using the Objects command
To check data consistency using the Objects command:
1.
From the Management Menu, select Objects, and then select Virtual Drive from the
sub-menu.
2.
Use the arrow keys to select the virtual drive you want to check, and then press
<Enter>.
3.
Select Check Consistency from the pop-up menu, and then press <Enter>.
4.
When prompted, use the arrow keys to select Yes from the dialog box to check the
drive.
5.
When checking is complete, press any key to continue.
6-20
Chapter 6: RAID Configuration
Advertisement
Chapters
Table of Contents
