IPv6 BMC Network Configuration
This item allows you to configure the parameter settings of IPv6 BMC network.
IPv6 Display Full Field [Enable]
Displays the full or brief IPv6 Field.
Configuration options: [Disable] [Enable]
IPv6 Display Full Formula [Enable]
Displays the full or brief IPv6 Formula.
Configuration options: [Disable] [Enable]
IPv6 Display Letter Case [Upper Case]
Displays the uppercase or lowercase letters of the alphabet.
Configuration options: [Lower Case] [Upper Case]
IPv6 BMC Lan Option [Enable]
This item allows you to enable or disable the IPv6 BMC LAN channel function.
Disabling this item will not modify any BMC network during BIOS phase.
Configuration options: [Disable] [Enable]
IPv6 BMC LAN IP Address source [Previous State]
Select to configure LAN channel parameters statically or dynamically (by BIOS or
BMC).
Configuration options: [Previous State] [Static]
The following items appear only when you set IP BMC Lan IP Address Source to [Static].
5-42
[Dynamic-Obtained by BMC running DHCP]
Chapter 5: BIOS Setup