Installing The Camera - Dell Precision 3540 Service Manual
Hide thumbs
Also See for Precision 3540:
- Service manual (116 pages) ,
- Owner's manual (59 pages) ,
- Setup and specifications manual (38 pages)
Table of Contents
Advertisement
8. Remove the
display
hinges.
9. Remove the
display
panel.
Steps
1. Peel the two conductive tape that secures the camera in place [1].
2. Using a plastic scribe carefully pry and lift the camera module from the display back cover [2].
3. Disconnect the camera cable from the connector on the camera module [3].
Installing the camera
Steps
1. Connect the camera cable to the connector on the camera module [1].
2. Insert the camera into the slot on the display back cover [2].
3. Affix the two conductive tape above the camera [3].
108
Disassembly and reassembly
Advertisement
Table of Contents
