Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P27.
You can adjust the flash output.
Applicable modes:
[U2 EV]/[U1 2/3 EV]/[U1 1/3 EV]/[U1 EV]/[U2/3 EV]/[U1/3 EV]/[0 EV]/[T1/3 EV]/
[T2/3 EV]/[T1 EV]/[T1 1/3 EV]/[T1 2/3 EV]/[T2 EV]
Note
•
Refer to P61 for details.
For details on [REC] mode menu settings, refer to P27.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•
Even if the ISO sensitivity is set to [ISO100], ISO sensitivity may become higher than [ISO100]
when a picture is taken with [I.EXPOSURE] enabled.
•
Compensation effect may not be achieved depending on the conditions.
•
[
] in the screen turns to yellow when [I.EXPOSURE] is in effect.
•
[LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
For details on [REC] mode menu settings, refer to P27.
Enlarging a picture with no picture quality deterioration
Applicable modes:
[OFF]/[ON]
Note
•
Refer to P48 for details.
For details on [REC] mode menu settings, refer to P27.
This can enlarge subjects even more than the optical zoom or extra optical zoom.
Applicable modes:
[OFF]/[2V]/[4V]
Note
•
Refer to P48 for details.
•
If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [MODE1].
102
VQT1U50
[FLASH ADJUST.]
[I.EXPOSURE] (Intelligent exposure adjustment)
) [DIGITAL ZOOM]
[EX. OPT. ZOOM]