Dell CFG-18180895 Owner's Manual page 33

Table of Contents

Advertisement

Error messages
INSERT BOOTABLE MEDIA
INVALID CONFIGURATION INFORMATION-
PLEASE RUN SYSTEM SETUP PROGRAM
KEYBOARD CLOCK LINE FAILURE
KEYBOARD CONTROLLER FAILURE
KEYBOARD DATA LINE FAILURE
KEYBOARD STUCK KEY FAILURE
LICENSED CONTENT IS NOT ACCESSIBLE IN
MEDIADIRECT
MEMORY ADDRESS LINE FAILURE AT ADDRESS,
READ VALUE EXPECTING VALUE
MEMORY ALLOCATION ERROR
MEMORY DOUBLE WORD LOGIC FAILURE AT
ADDRESS, READ VALUE EXPECTING VALUE
MEMORY ODD/EVEN LOGIC FAILURE AT
ADDRESS, READ VALUE EXPECTING VALUE
Description
The operating system is trying to boot to non-
bootable media, such as an optical drive. Insert
bootable media.
The system configuration information does not
match the hardware configuration. The message is
most likely to occur after a memory module is
installed. Correct the appropriate options in the
system setup program.
For external keyboards, check the cable
connection. Run the Keyboard Controller test in
Dell Diagnostics.
For external keyboards, check the cable
connection. Restart the computer, and avoid
touching the keyboard or the mouse during the
boot routine. Run the Keyboard Controller test in
Dell Diagnostics.
For external keyboards, check the cable
connection. Run the Keyboard Controller test in
Dell Diagnostics.
For external keyboards or keypads, check the cable
connection. Restart the computer, and avoid
touching the keyboard or keys during the boot
routine. Run the Stuck Key test in Dell Diagnostics.
Dell MediaDirect cannot verify the Digital Rights
Management (DRM) restrictions on the file, so the
file cannot be played.
A memory module may be faulty or improperly
seated. Reinstall the memory module or, if
necessary, replace it.
The software you are attempting to run is
conflicting with the operating system, another
program, or a utility. Shut down the computer, wait
for 30 seconds, and then restart it. Run the
program again. If the error message still appears,
see the software documentation.
A memory module may be faulty or improperly
seated. Reinstall the memory module or, if
necessary, replace it.
A memory module may be faulty or improperly
seated. Reinstall the memory module or, if
necessary, replace it.
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optiplex 7040-mini towerCfg-18213030-2Cfg-18003073/3-2

Table of Contents