Table of Contents
Advertisement
•
bezel
•
cover
6.
Follow the procedure in
Removing the processor
1.
Follow the procedure in
2.
Remove the:
•
cover
•
bezel
3.
Open the
front bezel
4.
Remove the
heat sink
5.
To remove the processor:
a. Release the socket lever by pushing the lever down and out from under the tab on the processor
shield [1].
b. Lift the lever upward and lift the processor shield [2].
c. Lift the processor out of the socket [3].
CAUTION: The processor socket pins are fragile and can be permanently damaged. Be
careful not to bend the pins in the processor socket when removing the processor out of
the socket.
Installing the processor
1.
Align the processor with the socket keys.
CAUTION: Do not use force to seat the processor. When the processor is positioned
correctly, it engages easily into the socket.
2.
Align the pin-1 indicator of the processor with the triangle on the socket.
3.
Place the processor on the socket such that the slots on the processor align with the socket keys.
4.
Close the processor shield by sliding it under the retention screw.
5.
Lower the socket lever and push it under the tab to lock it.
6.
Install the
heat sink
7.
Close the front bezel door.
8.
Install the:
a.
bezel
b.
cover
9.
Follow the procedure in
After Working Inside Your
Before Working Inside Your
door.
assembly.
assembly.
After Working Inside Your
Computer.
Computer.
Computer.
25
Advertisement
Table of Contents
